Car owners would not hesitate to call window tinting Palmdale, CA, for quality, satisfactory window tint installation. Window tints have lots of beneficial offers at the expense of their high price. Most would agree that they are investments worth the advertisements.

A window tint, made of thin-film layers, is essential in prolonging the lifespan of ones’ car. Aside from that, it gives extra privacy and aesthetics to the vehicle.

In choosing window tints, quality is a determiner of whether they will last longer. Cheaper window tints degrade faster than premium window tinting, Missoula. Well, why would you spend multi-dollars later if you can already afford high-quality tints since the start? Exposure to sunlight and the quality of installation also affects the window tint’s lifespan.

But, one thing is for sure. Whether your window tint is cheap or premium, it will deteriorate soon. Thus, replacing your worn-out tints is a must. Car owners may opt to tap a professional tint installer or do the process by themselves.

Materials needed

Before scraping your old window tints, be sure to prepare all the materials listed below first:

  • Razor Blades
  • Spray bottle
  • Soft cloth
  • Dishwashing soap
  • Glass Cleaner
  • Water

The step-by-step process in removing window tints

Remember that you need to avoid scratching your windows for a smooth, perfect new tint film coating. Removing a car’s old window tint is pretty easy but requires precautions. Now, proceed to the removal processes.

First Step: Incise a small cut on the film

The tint removal process begins by cutting open a small portion of the film through a razor blade. Be gentle and do not press the blade deep as doing such can inflict scratches to the windows or windshields.

Second Step: Peel the film slowly

Once you have already made an incision, be careful in peeling the tint off from the window. Take this step slow as the whole window tint can scrape off in one try. Use the razor blade again to lift the film’s edge if the peeling process in some portions does not go the way you wanted. Do the same process until no adhesive residue is left.

Third Step: Use a soapy water mixture in spraying the windows

Create a soapy water mixture by combining water and dishwashing soap inside a spray bottle. No exact measurements needed. Be sure that the solution will become gain a soapy quality. With a generous amount of soapy mixture, spray the parts exposed to the adhesive only.

Fourth Step: Sit, soak, and soften the adhesive

After spraying, let the soapy solution sit, soak, and soften the adhesive. Do not take this step for granted, as the process is crucial before proceeding to the fifth stage of the removal.

Fifth Step: Remove the remaining adhesives

Scrape off the adhesives left behind after the soaking process by using the razor blade. Remember that pressing the blade deep will cause scratches in the windows, so avoid doing it. Once the glass has dried up, use the soapy mixture, then repeat the scraping process to remove all tints.

Sixth Step: Cleaning the windows

Get a glass cleaner and soft cloth to clean the windows after removing the tints. Use a dishwashing and water mixture as a replacement if there is no available glass cleaner. Besides, never use ammonia-based cleaners and abrasive cleaning equipment.

Check this infographic by Kepler to know the steps in scraping your old car window tint.